Model series KH

Cooling systems from -100 up to 400 °C

Continually changing methods in the manufacture of the most varied products demand an ever increasing scope of temperatures. Intensely exothermic batch processes can only be controlled with highly dynamic thermostatic systems, such as the heating and cooling systems from LAUDA. The Kryoheaters fulfill the high requirements of thermostatic systems and already offer the modern heat transfer technology. The technology of Kryoheaters covers a range from -100 up to 400 °C. The field of application is currently only restricted by the physical properties of the available heat transfer fluids.

Your advantages at a glance

Your advantages at a glance

The KH advantages Your benefits
Model series KH
  • Digital temperature controller
  • Control of the outflow temperature or the consumer/product temperature
  • Temperature program/ramp mode
  • External setpoint adjustment via Profibus, Modbus or other interfaces
  • Preselection of heating and cooling times
  • Control accuracy ±0.1 °C
Model series KH
  • Cooling module for best possible configuration of compressor and performance quantity
  • Single-stage, two-stage and cascade modules available
  • Highly dynamic, energy-efficient cooling system
  • Suitable for desired operating temperature range
Model series KH
  • Stainless steel, water or air-cooled condenser in flange version
  • Hermetic version without seals
  • Automatic shut-off valve on cooling water inlet
  • Cooling water control valve in cooling water inlet
  • Return temperature limit on cooling water
  • Easy cleaning of the heat exchanger
  • Oils and water are not mixed
  • Contamination of heat exchanger reduced
  • Efficient cooling of the coolant
  • Corrosion and calcification avoided
Model series KH
  • Three-way control valve with bellows and actuator in flange version
  • Separation of heating and cooling circuits for extreme operating temperature ranges
  • Stabilization of minimal cooling powers
  • Gentle cooling – gentle heating
  • No thermal stress on switching from cooling to heating
  • Long service life of the heating and cooling system
Model series KH
  • Continuously controlled stainless steel electric heater as a flange version
  • Steam for heating
  • Heating power is adapted to actual energy requirement
  • For extending temperature range upwards
  • No start-up peaks
  • Low runing costs
Model series KH
  • Complete system test in LAUDA Test Bed before shipment; system with CE label
  • Functional testing of all components and checking of all set values
  • Pressure/leakage test with the heat transfer fluid
  • Test of control cabinet and control accuracy
  • Production of a test protocol; documentation of the tests carried out
  • FAT (Factory Acceptance Test) in presence ofcustomer
  • Hot and cold runs with the heat carrier at maximum and minimum operating temperatures
  • Systems quickly ready for operation, short commissioning times
  • Avoidance or prevention of leakage
  • Verification of control accuracy and high-precision processes
  • Check of all performance verifications
  • Systems designed to customer requirements, initial instruction and trial run already before shipment

Model series KH

KH process cooling systems

Cooling systems from -100 up to 400 °C

KH process cooling systems explosion-protected

Cooling systems from -100 up to 400 °C